KRK ROKIT 5 G5 5" Powered Studio Monitor (each)



The KRK Systems ROKIT 5 Generation Five is the most advanced studio monitor in its class. Whether you’re working on a chart-topping hit, a film score, or a personal project, they provide the tools you need to capture every nuance of your sound with astonishing clarity. Part of the Fifth Generation of KRK ROKIT Studio Monitors, along with the ROKIT 7 Generation Five and ROKIT 8 Generation Five, their onboard DSP technology provides three distinct Voicing Modes. Mix Mode, with flat frequency and phase response, is best for mixing, mastering, and critical listening. Create Mode is a more inspirational voicing best used for writing, producing, and casual listening. Focus Mode is a mid-focused voicing for critical analysis of the midrange band where vocals and most instruments have the most energy. The three Mix Modes eliminate the need for separate sets of monitors for different tasks. It’s like having three pairs of monitors in one. The ROKIT 5 Generation Five also features 25 boundary and tuning EQ combinations that help minimize and correct problems in your acoustic environment, and with the aid of the free KRK App, they make setting up your recording environment easy and precise.

Warranty: 2 Years

    • Three Voicing Modes – Mix, Focus, and Create – for 3-in-1 monitoring flexibility
    • 25 boundary and tuning EQ combinations to help minimize and correct problems in your acoustical environment
    • Custom-designed Class D power amplifiers for better audio integrity and reduced operating temperature
    • 5” Woven Kevlar® aramid fiber woofer for tight and accurate low and low-mid performance
    • New 1” silk dome tweeter design for improved high-mid, high frequency, and phase performance
    • Low Diffraction Baffle Design for lower distortion and better stereo imaging
    • Includes two magnetic faceplates for protective grille or no-grille flexibility
    • Optimized front-ported bass reflex enclosure for improved low-frequency performance
    • Acoustic foam wedge isolation pads to minimize resonance and support proper set-up positioning
    • Integrated mounting points for use with optional KRK mounting brackets, perfect for immersive audio studio installations
    • XLR, 1/4” TRS Combo analog input for wide compatibility with audio devices
    • Universal voltage, switching mode power supply for use in all global regions
    • Use with the KRK Audio Tools App: Acoustic Real-Time Room Analyzer and EQ Recommendation tool to help set the monitor for better, more accurate monitoring and faster mixing
    • Configuration: 2-Way Bass Reflex

      System Type: Active Studio Monitor

      Low-Frequency Driver: Woofer, 5-inch, woven Kevlar® aramid fiber cone, ferrite magnet

      High-Frequency Driver: Tweeter, 1-inch, Silk Dome, Copper Cap, ferrite magnet

      Frequency Response: (+/- 3 dB) 54 Hz – 30 kHz

      Frequency Range: (+3/-10 dB) 43 Hz – 40 kHz

      Crossover Frequency: 2.27 kHz

      Amplifier Configuration: Bi-amplified (Class D)

      HF Amp Power Output: 20 Watts (Rated Amplifier Power Output is measured at 1% THD+N)

      LF Amp Power Output: 35 Watts (Rated Amplifier Power Output is measured at 1% THD+N)

      Total Power: 55 Watts (Rated Amplifier Power Output is measured at 1% THD+N)

      Total Dynamic Power Output: 130 Watts (Rated Dynamic Power Output is measured as instantaneous peak power at 10% THD+N)

    • Max SPL: 104 dB (Max SPL is calculated as a function of the driver sensitivity (1W @ 1M) and the Dynamic Power rating)

      Coverage Angles: 155° Horizontal x 126° Vertical (Coverage Angles are averaged -6 dB down points from 900 Hz to 9 kHz)

      Analog Input Connector: Balanced XLR / 1/4" TRS Combo

      SNR (Signal to Noise Ratio): >101.5 dB (Low Sensitivity setting, balanced), >94 dB (High Sensitivity, unbalanced)

      AC Input Voltage: 100 – 240VAC (+/- 10%), 50/60 Hz

      Fuse Type: 5x20 mm T1A 250V

      Enclosure Construction: PVC Vinyl Wrapped MDF

      Baffle Construction: Structurally Reinforced High Impact Polystyrene

      Product Dimensions: (H x W x D) 11.34” (288 mm) x 7.52” (191 mm) x 9.53” (242 mm)

      Product Weight: 10.91 lbs. (4.95 Kg.)

      Packaged Weight: 14.33 lbs. (6.5 Kg.)

      Packaged Dimensions: (H x W x D) 15.75” (400 mm) x 10.24” (260 mm) x 12.6” (320 mm)

    Order weight is calculated on whichever of the dead (actual) or volumetric weight is the greatest. As of 10/9/21 capped $8.80 to $16.50 for up to 20kg to most areas. For orders under $50 options are Standard Postage $8.80 or Express Shipping for $16.50. Orders over $1,000 ship for free. Express Shipping covers one delivery attempt so please provide an address where someone is available to sign for courier delivery between 9am and 5pm weekdays. You can instruct us to ask the courier to leave your parcel unattended in a safe place, although please be aware that if anything happens to the parcel, neither us nor the courier company can be held responsible. Work addresses are a great delivery option. If using a work address please include the business' name.

    * for some larger items does not apply to Australian remote island locations, some mainland remote locations (outside Darwin NT and Perth WA metro areas) or outside Australia. If unsure if you are entitled to capped shipping it is best to contact us prior to placing order.