Acoust-X was developed and is manufactured by the same Californian company that brought to us DuraTex - America's #1 Speaker Cabinet Coating.
Acoust-X is a low density, high build, soft & flexible sound absorbing coating for speaker cabinet interiors that helps reduce unwanted bounce back, resonance and unwanted vibrations. Apply it within the speaker cabinet prior to assembling the components. Or use it between auto panels to cut down on vibration and distortion. Acoust-X has even been used on venue ceilings and walls to cut down high end reflexion. It is a medium grey colour but can be painted over with any colour waterbased paint.
Heavy bodied, yet creamy to apply. Dries quickly and is waterbased.
Substrate must be clean and dry before you apply Acoust-X. For best results apply in two moderately thick layers and allow to dry between coats. A stippled surface is more sound dampening than a smooth surface, so don’t worry about trying to smooth the coating out too much.
Brush on a heavy coat at least 3 times heavier than typical paint and allow to dry. Dabbing in the wet material helps create a rougher, more efficient layer. Apply second coat if necessary after first coat has dried.
Use a 3/4″ nap and up to a 1-1/4″ nap to create a thick, rough layer. Apply second coat if necessary after first coat has dried.
Use a large orifice and allow the Acoust-X to spatter the inside of the cabinet. Do not try to make the coating smooth, it works best with a rougher finish.
Approximately 50 to 75 sq feet per gallon (5 to 7 square metres per 3.8 litres)
(At 50 square feet per gallon, the yield will be 23 dry mils of soft, flexible, sound absorbing coating......or...in metric that is 'at just under 5 square metres, the yield will be 23 dry mils of soft, flexible, sound absorbing coating)
Colour – Medium Grey
Dave Jedlicka (www.sourceonemedia.com) - April 10, 2012
" I use Acoust-X inside all my line array designs. I get much flatter response and greater gain before feedback because I have much less acoustic transmission from the back and the sides of the cabinets. this is a really great product and I can’t imagine building a speaker without it! "
We charge just a $15 per order flat rate for express shipping*. This covers one delivery attempt so please provide an address where some one is available to sign for courier delivery between 9am and 5pm weekdays. You can instruct us to ask the courier to leave your parcel unattended in a safe place, although please be aware that if anything happens to the parcel, neither us nor the courier company can be held responsible. Work addresses are a great delivery option. If using a work address please include the business' name.
* for some larger items does not apply to Australian remote island locations, some mainland remote locations (outside Darwin NT and Perth WA metro areas) or outside Australia. If unsure if you are entitled to $15 shipping it is best to contact us prior to placing order.
Type: Speaker Cabinet Coatings